classification
Contact us
Name:318 Micronized PE wax powder
Published:2018-03-13 15:41:47Click to rate:
|
318 Micronized PE wax powder
Physical parameters
Appearance | White powder |
Particle size D50(µm) | 6.5 |
Melting point(℃) | 120 |
Product feature
318 is micronized high density PE wax powder. Enhance the hardness, anti-abrasion and anti-scratching performance of the coating.
Typical application:
Flooring coating, industrial coating, powder coating, ink and water-based ink.
Instructions:
This product is fluffy micro powder, easy to disperse, and can be directly dispersed in coatings and inks by means of high speed stirring. The recommended dispersion condition is 1500R / min for more than 15 minutes.
*Water-based system
Stir the resin, dispersion, wetting agent(without water or other slurry) by 400~500R/min according to the formula, adding the wax powder during the stirring. Speed up to 1200~1500R/min as soon as the wax powder are added into the system completely. 15-20min later, add the water and other slurry materials, speed down to 600-800R/min, uniformly disperse for 15-20mins.
Addition:
Recommended ratio: 0.3~2%, the specific amount of addition is adjusted according to the actual formula.
Packaging and storage
*Net weight 20 kg / bag
*Store in a ventilated and dry place. After unpacking the product, unused product should be tied tightly and used up as soon as possible to avoid getting wet.
Tel: +86 769 22288415
E-mail: dgoceanchem@163.com
Website: http://www.dgoceanchem.com
www.linkedin.com/company/oceanchem
Address: Room 502, Block A, Datang E-Commerce Center, Taixin Road, Wanjiang District, Dongguan City, Guangdong Province
Guangdong Ocean New Material Technology Co., Ltd., Ltd. All rights reserved©Copyright 2020
* This website which includes the text, images and etc. all belongs to theGuangdong Ocean New Material Technology Co., Ltd.,shall not be reproduced without permission*