613 Water-based wax slurry

Used to improve surface properties in water-based coatings and inks.

Production Information

Chemical composition

Non ionic high-density polyethylene wax emulsion.

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Non volatile matter:  40%

Particle size(D50) :  5-6μm

Carrier:           Water

Appearance:       White slurry

Storage and transportation

Store in a cool, dry, and ventilated place, stir well before use.

Application

Liquid coating and ink

Product features and advantages

This additive can improve surface wear resistance and viscosity resistance in water-based coatings. It can significantly increase the coating's scratch resistance, friction resistance, and improve surface smoothness.

Recommend usage

Waterborne coatings, ink, water-based varnish, architectural coatings, leather, etc

Recommended dosage

1-5%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

It is best to add the product at low speed during the final stage of production. The product should be stirred evenly before use.

502 Matting powder

Easy to disperse in the system, giving the paint film a soft matte effect.

Product Information

Chemical composition

Precipitated silica

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Oil absorption:       240-300g/100g

Average particle size:  5.5μm

Porosity :           1.5ml/g

PH index:           6-7

Surface treatment:    No

Supply form:        Fluffy micro powder

Storage and transportation

Store in a cool, dry, and ventilated place.

Application

Liquid coating and ink

Production features and advantages

This powder can provide a good matte effect in solvent based paint inks, giving the paint film a soft touch and improving the coating's viscosity resistance.

Recommended usage

Industrial coatings, printing inks, water-based coatings, ink varnish, furniture coatings

Recommended dosage

2-8%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

This product can be dispersed in coatings and inks through high-speed stirring or grinding, and can also be added after preparing a slurry.